Mic test

See your voice on a live waveform and record a quick playback.

Runs in your browser. Nothing is recorded or sent anywhere.

How to test your microphone

  1. Click Turn on microphone and allow access when your browser asks.
  2. Speak and watch the waveform and level meter respond.
  3. Press Record 5 seconds, then play it back to check how you sound.

What the readings mean

ReadingTypical valueWhat it tells you
Sample rate44100 Hz or 48000 HzHow many times per second the microphone's signal is measured
Channels1 (mono)Almost all microphones capture a single channel; some interfaces report 2
Level meterMoves with your voiceRoughly how loud the signal is right now, not an exact decibel reading
Clipping warningAppears past peak levelThe signal is hitting the top of what can be recorded without distortion

A healthy level meter bounces well below the top of the bar during normal speech and only nears the top on loud peaks. A meter pinned near the top constantly usually means the input gain is set too high.

Fixing common microphone problems

  • On Windows, open Settings, then Privacy & security, then Microphone, and turn on both the global toggle and access for your browser. Then check Settings, System, Sound, Input to confirm the right device is selected and its volume is not muted.
  • On macOS, open System Settings, then Privacy & Security, then Microphone, and allow access for your browser.
  • In Chrome, visit chrome://settings/content/microphone or click the lock icon in the address bar to check the site is allowed.
  • In Safari, open Safari, then Settings, then Websites, then Microphone, and set this site to Allow.
  • Check for a physical mute button or switch on headsets and USB microphones, since muting there overrides every software setting.

How this test works

Once you allow access, the page reads the raw audio signal from your microphone using the Web Audio API and draws it as a live waveform, updating on every animation frame your browser renders.

The clipping warning triggers when a sample gets close to the maximum value the signal can reach, which is the same point at which real distortion starts. The 5 second recording uses the browser's built-in MediaRecorder, then plays back straight from memory with no server involved at any step.

Mic test FAQ

How do I allow microphone access in Chrome or Safari?

Click the lock or camera icon in the address bar, choose Microphone, and set it to Allow, then reload the page. On Windows, also check that Settings, Privacy, Microphone has app access turned on.

Why does it say no signal?

This shows after a few seconds of silence, which usually means the wrong microphone is selected, the mic is muted at the hardware level, or the input level in your operating system is set too low.

What does the clipping warning mean?

Clipping means the signal is hitting the top of what the microphone can record, which distorts the sound. Move back from the mic or lower the input gain in your system sound settings.

Is my recording uploaded anywhere?

No. The waveform, level meter and the 5 second recording all stay on your device and are never sent anywhere.

Why does the sample rate show 48000 Hz on one device and 44100 on another?

Many built-in laptop and webcam microphones default to 48 kHz because it matches common video standards, while some USB audio interfaces default to 44.1 kHz, the rate CDs use. Both are more than enough for clear voice recording.

Can I test a Bluetooth headset microphone?

Yes. Keep in mind many Bluetooth headsets switch to a lower-quality, mono calling mode automatically as soon as the microphone is used, which can sound noticeably different from the same headset's music playback.

Why is there no sound at all in my 5 second recording?

Confirm the correct device is selected in the microphone dropdown, and check that its input level is not set near zero in your operating system's sound settings, which some apps lower automatically.

Does a higher sample rate mean better sound?

Not for speech. 44.1 or 48 kHz already captures every frequency a microphone can pick up from a human voice, so a higher number mainly matters for music production, not for checking that a mic works.

Related tools