Tone generator
Play a precise test tone at any frequency and waveform.
Start at a low volume, especially with headphones on.
- 1 Hz to 20 kHz
- 4 waveforms
- Sweep and binaural modes
How to use the tone generator
- Set the frequency with the slider, the number box or a note preset.
- Pick a waveform and set the volume.
- Press Start, then Stop when you are done.
Waveforms explained
| Waveform | Sound | Common use |
|---|---|---|
| Sine | Pure and smooth, one frequency only | Speaker and hearing frequency checks |
| Square | Buzzy, rich in odd harmonics | Retro game and synth sounds, basic electronics testing |
| Triangle | Softer than square, fewer harmonics | Mellow synth tones |
| Sawtooth | Bright and buzzy, rich in all harmonics | Classic analog synth leads and basses |
Common reference frequencies
- A4, 440 Hz: the standard concert pitch most instruments are tuned against.
- C4 (middle C), about 261.63 Hz: a common reference point in music theory.
- 1 kHz: a standard reference tone used to check and calibrate audio levels.
- 20 Hz to 20 kHz: the commonly cited range of human hearing, narrower for most adults in practice.
What people use a tone generator for
Audio technicians play a steady tone or a slow sweep through a speaker to listen for rattles, buzzes or a driver that has stopped reproducing part of the frequency range.
Musicians and hobbyists use single note presets as a basic pitch reference, and electronics hobbyists use specific frequencies to test filters, amplifiers or other audio circuits by ear.
Tone generator FAQ
What frequency is note A4?
A4 is 440 Hz, the standard reference pitch most instruments are tuned to. This page includes it as a one-click preset along with other common notes.
What is a sweep used for?
A sweep plays every frequency from 20 Hz to 20 kHz in turn, which is useful for finding a rattling part in a speaker enclosure or a dead spot in a driver.
What does binaural mode do?
It plays a slightly different frequency in each ear, which only works correctly over headphones. The tiny difference creates a pulsing beat that some people use for focus or relaxation.
Why should I start at a low volume?
A tone at full volume, especially above a few hundred Hz, can be startling and loud enough to cause discomfort or hearing damage over headphones. Raise the volume slowly after you start.
Why does binaural mode need headphones to work properly?
Speakers let both ears pick up sound from both channels, which cancels out the separate per-ear frequencies that create the binaural beat. Headphones keep each channel isolated to one ear, which is what the effect depends on.
Can I use this to tune an instrument?
Yes, for a rough check. The note presets, including A4 at 440 Hz, match standard concert pitch, so you can compare a note by ear alongside a dedicated tuner.
Why does a plain sine tone still sound harsh at high pitches?
Human hearing is especially sensitive in the upper range, so even a mathematically pure sine wave can feel piercing above a few kHz. That is a property of your ears, not the waveform, which square and sawtooth waves make more obvious at any pitch through added harmonics.
What is the full audible range this generator covers?
It plays anywhere from 1 Hz, well below what anyone can hear, up to 20 kHz, the top of the commonly cited range for young human hearing, so you can test both extremes and everything most speakers and ears can reach in between.